Church Access Control Kit

This Church Magnetic Lock Access Control Kit comes with everything you need to create a wireless entry access solution for a Church or similar application. Wireless range up to a 150+ feet line of sight. You may add a battery backup, keyswitch, intercom with release, keypad or access control system to this kit.

• 1200 Lbs. Holding Force Magnetic Lock
• 1 Bosch (Hands Free) Exit Motion Sensor
• 1 433 MHz Long Range Wireless Receiver (Range 150'+ line of sight)
• 2 433 MHz Remotes
• 1 Power Supply
• 1 Illuminated Push Button (Red or Green, depending on stock)

Church Access Magnetic Lock Access Control Kit Wiring Instructions Video

Additional Product Information

MAGNETIC LOCK WITH 1200 LBS HOLDING FORCE:

Mount Type - Surface Mount Single Door
Holding Force - 1200 Lbs.
Lock Sensor - Yes
LED - Yes
Monitoring - Yes
Build-In Voltage Spike Suppressor - Yes

BOSCH DS150I MOTION SENSOR

Bosch DS150i Motion Sensor is specifically designed for Request-to-Exit (REX) applications. The DS150i detects motion in its coverage area and signal an access control system or door control device. Color: White.

Bosch DS150i Manual

The DS150i Series Exit Sensors are Passive Infrared Detectorsspecifically designed for “request to-exit” applications. They detect motion in their coverage area andsignal an access control system ordoor control device.

FEATURES:

• Single or Double Door Use
• Wall and Ceiling Mountable
• Internal Vertical Pointability
• Wrap-Around Coverage Pattern
• 12 or 24 AC or DC Operation
• Up to 60 Second Adjustable Latch Time
• Selectable Relay Trigger Mode
• Selectable Fail Safe/Fail Secure
• UL Listed
• CE Approved

Long Range Wireless Kit Installation Instructions Sheet

• Buttons: 1
• Frequency: 433MHz
• Battery: 1 ea. 12V A23
• Operating Temperature: -20F - 100F
• Dimensions: 1/2" x 1-7/8" x 1-1/2"
• Number Combinations: 1024
• Weight: 1 oz.

• Frequency: 433MHz
• Coding Options: 10 dip switches
• Channels: 2
• Range: 150+ feet (Line of Sight)
• Supported Voltage: 12-24V AC or DC
• Antenna Included: yes

TRANSFORMER / POWER SUPPLY FEATURES:

• 12 Volt 1.1 Amp Transformer/Switching Adapter
• This transformers produce a consistent 12 Volt power supply for electronics.
  
• Cut the cord and wire directly to your locking device.
• Small size is easy to conceal.
• Input: 100-120V-60Hz 0.50AOutput: 12V---1.1A
• Level 3 FCC Approved UL Listed

EXIT BUTTON FEATURES:

• Color: red or green depending on stock
• Illuminated Button
• Stainless Steel Face Plate
• Micro Switch: NO (normally open) & NC (normally closed)
• Current Draw: 12VDC, 20mA
• Dimension: 115 L × 70 W × 5 H (mm) / 4.53” x 2.76” x 0.2”
  

All Magnetic Locks Include Armature Plate & Mounting Hardware For Basic Out-swing Applications.

Please Note In-swing Doors require L & Z Brackets sold separately and available in our "Magnetic Lock Brackets" section.

Please Inform Us If Application Requires a UL Listed Magnetic Lock

PAWN SHOP MAGNETIC LOCK KIT

LAUNDROMAT MAGNETIC LOCK KIT

COMPLETE WIRELESS MAGNETIC LOCK KIT

CONVENIENCE STORE MAGNETIC LOCK KIT

GAS STATION MAGNETIC LOCK KIT