Access Control Accessories

Serial interface cable to connect AM3Plus, AE1000Plus, or AE2000Plus to a PC's 9-pin serial port for local programming and control.

FAS-Timer-7DTIMER110V 110V Digital Access Control Timer

This FAAC Photobeam NIDEK 785105 Kit includes a pair of Double Mounting Posts. Use these posts if you do not intend to wall-mount your photobeams. Photobeam Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.

Additional battery for battery back-up kits (Models 12VDC7ABUPBOX & 12VDC7ABUP) using 12V / 7Ah battery.

The MAG-PAM2 NO / NC Relay provides 7.0 Amp form C contacts. The relay may be energized by one of two input voltages: 12VDC or 24VDC.

Model MAG-BZ05 Mini External Buzzer for access control  Lock systems. Buzzer sounds informing you your magnetic lock is demagnetized / unlocked.

High quality 36" electric exit (push) bar for indoor use with all our models of Magnetic Locks. Exit (pressure sense) Bars purpose is to release electromagnetic door locks for uninhibited egress. NC & NO function!

High quality 42" electric exit (push) bar for indoor use with all our models of Magnetic Locks. Exit (pressure sense) Bars purpose is to release electromagnetic door locks for uninhibited egress. NC & NO function!

This unique device will call you and let you know if your door or gate is left opened.  Door contact switch included!

The SK-LAN-MOD wired module includes an RJ-45 jack, 2 status LEDs, and provides an auto-sensing 10/100 Ethernet transceiver.

Nice BA3-A Weather-proof box in gray heavy Duty plastic. Can hold up to two 12V-7Amp. batteries. Dimensions: 11" x 8 1/4" x 4 1/2"

Elite Model OMNI-EXB Extended Control Board To Use With Chamberlain, Elite & Lift-Master Gate Operators when Installing A Magnetic Gate Lock.

This FAAC Photobeam NIDEK 785105 Kit includes a pair of Single Standard Mounting Posts. Use these posts if you do not intend to wall-mount your photobeams. Photobeam Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.

SecuraKey SK-24VDC 500 Ma PLUG-IN POWER SUPPLY for the SecuraKey SK-ACP Access Control Panel.

The SecuraKey SK-ACP-PS comes with a plug-in transformer that converts 110VAC to 24 VDC and A 12 VDC, 1.9 amp-hour battery that provides system backup power and stabilizes the voltage to the control panel.

Model PEDESTAL 42" x 2"  Aluminum Heavy Duty Pedestal Black Powder Coated. Weather Proof! Great for Telephone Entry Units and a variety of other access control devices.

This accessory for the Securakey SK-ACP is an addressable external device server, which allows connection of the gateway panel or reader to a Local Area Network, using TCP/IP protocol. One SK-LAN-MOD unit connects the reader network to the LAN, permitting access from any connected PC. RS-232 cable is included.

This relay will let you open & monitor your electric door lock or gate REMOTELY from ANY computer.

FAS-Timer-7DTIMER24VDC 24 Volt Weekly & Daily Digital Access Control Timer, 24VAC/DC.

Model 12VDC7ABUPBOX Battery Back-Up System & Enclosure For Magnetic Lock. Includes Battery (12VDC 7 Amp), Enclosure, Switching Board, And Transformer (16 VAC 40 Amp transformer). Workable system for 6, 12 & 24VDC!

Power Supply Box, DC 12V 4Amps, 9 Ports. Elimanate multiple wires from multiple transformers /power supplies for CCTV cameras and Electric Locks!

FAS transformers produce a consistent 12 Volt power supply for electronics. Cut the cord and wire directly to your locking device.

Maglock transformer 12 volt power supply. 12 volt 1 Amp (1,000 mA) transformer / switching adapter produces a consistent 12 Volt power supply for electronics.

Altronix Model 6062 programmable timer is suitable for many functions that require a timed operation including Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer.

The Aiphone LEF-3 is a selective call open voice style master station with the capacity of up to 4 total stations.  Any combination of subs and masters can be used up to its maximum capacity.